Advanced Trackers

Advanced trackers are selected when the project needs richer vehicle data and flexible installation options. They can support connected fleet workflows from location tracking to CAN/FMS values, driver identification and sensor-based automation.

Request information View support packages

Details

How this helps your fleet

Professional tracker family for vehicles that need CAN data, I/O, BLE accessories, driver identity, geofences and remote configuration.

Every BCE Telematics setup can be adapted to the customer’s fleet, users, reports and operational workflow. We help with configuration, training and support so the system is useful for end users, not only installed.

Main capabilities

LX41-EA, LX43-EA and LX45-EA models
StCAN 2G, XtCAN 2G and XtCAN XG3792M05 options
CAN-capable variants for vehicle data
Programmable I/O for sensors and accessories
Remote configuration and fleet-ready event logic

Specifications

Technical fit before installation

We review model, connectivity, power, accessories and platform configuration before recommending hardware for a project.

Device

LX41-EA

Compact LX-series tracker for installations that need LTE connectivity and basic I/O.

Connector: 4 pins
Cellular: 4G LTE Cat 1 bis with 2G fallback
Positioning: GPS L1, GLONASS L1, Galileo E1, QZSS L1
Bluetooth: Bluetooth 5.4 LE
Digital inputs: 1x
Digital outputs: 1x
CAN / RS232 / RS485 / 1-Wire / Analog: Not listed for LX41 in the public LX40 EMEA I/O table

Device

LX43-EA

LX-series tracker with expanded 16-pin connector and multiple wired interfaces.

Connector: 16 pins
Cellular: 4G LTE Cat 1 bis with 2G fallback
Positioning: GPS L1, GLONASS L1, Galileo E1, QZSS L1
Bluetooth: Bluetooth 5.4 LE
RS232 / RS485 / 1-Wire: 1x / 1x / 1x
Digital inputs / outputs: 4x / 4x
Analog inputs: 3x

Device

LX45-EA

Advanced LX-series tracker for CAN-capable vehicle data projects and richer I/O.

Connector: 16 pins
Cellular: 4G LTE Cat 1 bis with 2G fallback
Positioning: GPS L1, GLONASS L1, Galileo E1, QZSS L1
Bluetooth: Bluetooth 5.4 LE
CAN ports: 2x
RS232 / RS485 / 1-Wire: 1x / 1x / 1x
Digital inputs / outputs / analog inputs: 4x / 2x / 3x

Device

StCAN 2G, XtCAN 2G, XtCAN XG3792M05

Advanced 2G tracker options available for projects where those models are required.

Models: StCAN 2G, XtCAN 2G, XtCAN XG3792M05
Connectivity: 2G
Project fit: Advanced tracker options for CAN-oriented or existing 2G fleet projects
Final check: Exact model datasheet, harness and regional network availability confirmed before order

LX-series common specifications

Dimensions 91 mm W x 20 mm H x 68 mm D

Weight 64 g

Housing material PC, UL94 V-0

Seal IP67 with optional case

Input voltage 12V/24V DC nominal, 9-36V DC range

Average idle current 40 mA @ 12V input

Full active current without load on outputs 100 mA @ 12V input

Deep sleep current <2 mA @ 12V input

Optional battery 210 mAh or 850 mAh lithium-ion

Operating temperature With internal battery: -20 C to +60 C; without internal battery: -40 C to +85 C

Storage temperature -40 C to +85 C

SIM card 4FF slot

GNSS accuracy 2.5 m CEP50

Sensors 3-axis accelerometer

Certification CE, RoHS

LX-series I/O options

LX41-EA 4 pins; 1x digital input; 1x digital output

LX43-EA 16 pins; 1x RS232; 1x RS485; 1x 1-Wire; 4x digital inputs; 4x digital outputs; 3x analog inputs

LX45-EA 16 pins; 2x CAN; 1x RS232; 1x RS485; 1x 1-Wire; 4x digital inputs; 2x digital outputs; 3x analog inputs

Final device selection depends on region, mobile network availability, vehicle type, harness and installation requirements.

Implementation

Delivered with practical telematics knowledge

We do not only provide software or devices. We help end users understand how to use the system, how to read reports and how to improve the setup over time.

ConsultationWe define the goal and best technical approach.

ConfigurationWe prepare users, units, sensors, alerts and reports.

TrainingWe explain how the solution should be used daily.

SupportWe offer one-time or monthly support options.